Published at Wednesday, July 25th, 2018 - 10:41:00 AM. . By Bonnie Owen.
Tools needed: FlexSet A push broom or blower Drill Trowel or Lute - First ensure that the damaged area is clean and dry. Sweep or blow out cracks so there is no loose debris. Using Roklins FlexSet Concrete Repair Product, carefully pour contents of bottle \\"a\\" into provided 5-gallon bucket then add special sand. Next, shake thoroughly and pour bottle \\"b\\" into sand mixture. Mix with a paddle-mixer, using a drill. When mixture is completely wet, pour FlexSet onto damaged area and use a trowel or lute to smooth material into cracks. When damage is sufficiently smooth, toss topping sand by hand over repaired area to create a uniform look and feel. Your driveway can be ready for vehicles in about an hour.
The prime cause of cracks in concrete foundation is seepage of water. Such cracks caused due to leakage of water are thin and hairline. They may widen over time, but they are present only in those areas where the seepage occurs. In order to repair leakage cracks, it is necessary first to investigate the source and the point from which the leakage originates.
Any content, trademark’s, or other material that might be found on the Tibetan website that is not Tibetan’s property remains the copyright of its respective owner/s. In no way does Tibetan claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Tibetan. All Rights Reserved.