Published at Thursday, January 25th, 2018 - 08:33:30 AM. . By Maritza Emerson.
The next step is mixing the Cerlon. This is done in 5 gallon buckets using the buckets that the Cerlon comes in take and pour ½ of the Cerlon in a clean bucket and mix the product half at a time. The most important part of mixing Cerlon is the ratio of water to the Cerlon has to be measured very accurately. A paddle on an electric drill that you use from mixing taping compound or floor leveler can be used to mix the Cerlon.
But if the crack is sinister and not the do-it-yourself kind, then it is most prudent to shell out a few dollars and hire some good repairmen. Such cracks occur due to rods which may have rusted inside and snapped or because of deterioration of the materials present within the concrete. Some leakage cracks when ignored can also reach dangerous levels. Such cracks are more found in poured concrete. Contractors treat the concrete foundation with urethane injections to extract the embedded water. They may even excavate the area around the foundation and replace the faulty tile or construct a provision for the water to lose contact with the foundation.
Any content, trademark’s, or other material that might be found on the Tibetan website that is not Tibetan’s property remains the copyright of its respective owner/s. In no way does Tibetan claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Tibetan. All Rights Reserved.