By Bonnie Owen. Measuring Tools. Published at Thursday, February 01st, 2018 - 19:12:35 PM.
There two major types of plastic pipe: the rigid and flexible forms. Depending on the type of plastic it is made of, rigid or firm pipes are used for hot and cold water systems. In order to cut rigid pipes, a hack saw can be used. Solvent cement can easily glue pieces together. A tube cutter that is used for flexible copper pipe is convenient for cutting rigid style plastic pipes. However a specialized blade is demanded - one that is meant for chopping plastic not cast iron or bronze metal.
Recess This is the measurement you need to take if you want your blind to fit inside the window recess. We will make your blind to fit into the recess perfectly. Theres no need for you to make any adjustments. Two simple steps to a recess measurement: 1. Measure the width of the recess from wall to wall in three places as shown. Note down the shortest measurement - this is the one well use. 2. Measure the drop by taking the measurement from the top of the recess to the window sill in three places as shown. Note down the shortest measurement.
Plan and Begin laying Your Flooring - Now that you have everything you need, you are ready to begin. The first thing you need to do is remove everything from the room. If you are going over vinyl or linoleum you do not need to remove it, Pergo is only 9mm thick so you can easily go right over it. If you had carpet you will need to remove it and all the carpet tacks. Then sweep the floor and make sure all debris is removed. Make sure that you remove all base boards and door casing, this will allow you to make less cuts.
Any content, trademark’s, or other material that might be found on the Tibetan website that is not Tibetan’s property remains the copyright of its respective owner/s. In no way does Tibetan claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Tibetan. All Rights Reserved.