By Madelyn Roberson. Concrete Tools. Published at Saturday, February 03rd, 2018 - 21:59:40 PM.
However dont believe that this is your lone alternative in decorative concrete. You could also decide to shine your cement with grinders that contain grits and diamond pads. Most concrete floor will tolerate a grit of 800. At least one technique is to add Sodium Silicate or Lithium Silicate to the cement while it solidifies which will boost the capability to add gloss and grit with the polished off cement. Immediately following numerous stages with the grinders you should have a glassy and smooth finish to the cement. Dye coloring might be added throughout the polishing stage which will make for a very decorative cement finish.
Decorative Concrete Coating Techniques - Stamped Concrete: Made of fiberglass or steel, stamped concrete uses negative patterns to mark a shape or form onto wet concrete. Templates are designed in such a way to create any kind of pattern like brick, tiles, stone, wood, and flagstone. Colors are made in such a way that can easily mix with the concrete. These colors are mixed with the concrete. This technique is used to etch large and complex patterns to enhance the landscape architecture.
The next step is mixing the Cerlon. This is done in 5 gallon buckets using the buckets that the Cerlon comes in take and pour ½ of the Cerlon in a clean bucket and mix the product half at a time. The most important part of mixing Cerlon is the ratio of water to the Cerlon has to be measured very accurately. A paddle on an electric drill that you use from mixing taping compound or floor leveler can be used to mix the Cerlon.
Any content, trademark’s, or other material that might be found on the Tibetan website that is not Tibetan’s property remains the copyright of its respective owner/s. In no way does Tibetan claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Tibetan. All Rights Reserved.